Current position > Contact Us
Quick Answer: Siemens and ABB set the benchmark for magnetic flow meters in water, wastewater, and chemical process control. Silver Automation Instruments offers compatible electromagnetic flow meters with DN15 to DN2000 sizes, rubber or PTFE liners, and 4-20 mA HART output. Send your pipe size, flow range, and medium to get a quote within one working day.
Siemens magnetic flow meters appear across municipal water plants, food plants, and mining sites in Southeast Asia and the Middle East. The MAG 5100 W model is common on raw water and treated water lines from DN25 to DN2000. ABB flow meters, especially the ProcessMaster FEP300 series, cover a DN3 to DN2000 range. Both vendors offer accuracy near 0.2 percent, PTFE or PFA liners, and HART or PROFIBUS communication. Engineers trust these brands because spare parts and local service partners are available in many countries.
But the installed base tells only part of the story. A water utility in Vietnam ran a DN400 Siemens MAG 5100 W on a raw water intake for seven years without major issues. A chemical plant in Saudi Arabia uses ABB ProcessMaster meters on brine lines with Hastelloy C electrodes. These field cases show why both brands became reference points in process control.
Magnetic flow meters need the right liner and electrode combination. Siemens and ABB offer liners like PTFE, PFA, and ebonite. Electrode options include 316L stainless steel, Hastelloy C, and titanium. For seawater or desalination service, titanium electrodes and PTFE liners handle chloride levels above 20,000 mg/L. For food and beverage lines, ABB HygienicMaster uses FDA compliant PFA liners. Siemens SITRANS FM MAG 3100 with a MAG 6000 transmitter works well on aggressive chemicals at temperatures up to 180 degrees Celsius.
In practice, most engineers skip the data sheet details and ask three questions. What is the process pressure? What is the conductivity? What is the pipe size? Magnetic flow meters require a minimum conductivity around 5 microsiemens per centimeter for standard models. For demineralized water or solvents, a Coriolis mass flow meter from Silver Instruments is often a better fit. For high viscosity fluids above 100 cP, an oval gear flow meter may offer better accuracy at low flow.
Grounding rings matter on coated or non-conductive pipe. Siemens and ABB both offer grounding electrodes or rings. Silver Instruments includes a grounding ring as standard on PTFE lined meters. For cathodic protection areas, use a meter with isolated grounding. Send your pipe material when you ask for a quote.
Silver Instruments supplies electromagnetic flow meters for the same process loops where Siemens and ABB models are specified. Our EMAG series covers DN15 to DN2000. Liner options include natural rubber, PTFE, and ebonite. Electrode options include 316L, Hastelloy C, titanium, and tantalum. Accuracy is 0.5 percent for standard models and 0.2 percent for premium models with 4-20 mA HART output. This covers most water, wastewater, and chemical transfer applications.
We have seen many cases where a plant needs a meter within three weeks but the Siemens or ABB distributor quotes eight to ten weeks. Last year a customer in the Philippines needed a DN150 electromagnetic flow meter for a cooling water line. Their OEM package required a Siemens compatible signal output. We supplied a Silver Instruments EMAG with HART and a calibration certificate in 14 days. Installation was direct. No adapter changes were needed.
Empty pipe detection is a useful feature on pump discharge lines. Some plants run pumps dry for short periods. Silver Instruments EMAG models can include empty pipe detection and bidirectional flow totalization. Specify these options at order time to avoid a second shipment.
In Vietnam and Thailand, water treatment contractors often request Siemens or Silver Instruments electromagnetic flow meters for river water and backwash lines. In the Middle East, desalination plants need seawater flow meters for feed lines and brine discharge. For a seawater flow meter for desalination plant service, PTFE liner and titanium electrodes are the safe combination. In Latin America, food and beverage plants look for sanitary connections and CIP friendly liners. We can provide tri-clamp connections on DN15 to DN100 meters for milk, juice, and beer lines.
In Nigeria and Kenya, water service providers buy electromagnetic flow meters for borehole and distribution networks. Silver Instruments ships to Lagos and Mombasa by air or sea. In Australia and New Zealand, mining and water treatment plants often need abrasion resistant liners for slurry lines. Natural rubber liners handle fine slurry. PTFE works better on aggressive water.
For oil and gas produced water, the medium may contain oil traces and solids. Magnetic flow meters work well if the water phase remains continuous. We recommend a Coriolis meter when the oil fraction exceeds 5 percent. Send the production data and our engineers will pick the right meter.
Price depends on liner, electrode, diameter, and transmitter type. A DN50 rubber lined electromagnetic flow meter with 316L electrodes costs less than a DN300 PTFE lined meter with Hastelloy C. Silver Instruments standard models are priced below equivalent Siemens and ABB models for the same material and accuracy class. Lead time for standard DN15 to DN300 is often 5 to 10 working days. Large sizes above DN600 may need 15 to 20 working days.
For a fast quote, send your pipe size (DN), flow range (m3/h), process temperature (°C), and medium. Also include the signal output your control system needs, such as 4-20 mA HART, pulse, or RS485 Modbus. Tel: +86-25-68650347. Whatsapp: +86-25-52155837. WeChat: +86 15365082610.
Can Silver Instruments electromagnetic flow meters replace Siemens or ABB models directly?
In most cases yes, for standard process connections and 4-20 mA HART output. Check the liner and electrode material against your medium. Send the old model number and our engineers will confirm a direct replacement.
What is the typical delivery time for a Silver Instruments magnetic flow meter?
Standard DN15 to DN300 meters ship in 5 to 10 working days. Large sizes and special liners may need up to 20 working days.
Which liner is best for seawater or desalination brine?
PTFE or ebonite liners with titanium or 316L electrodes work well. For high chloride levels above 20,000 mg/L, titanium electrodes are the safe choice.
Do you supply flow meters for ATEX Zone 1 or Zone 2 areas?
Yes. We offer explosion proof and intrinsic safe options for electromagnetic and Coriolis meters. Provide the zone classification and gas group for a correct quote.
What information do you need for a price quote?
Send pipe size, flow range, process temperature, pressure, medium, and required output signal. We reply within one working day.
