Current position > News detail
『Steam flowmeter quotation』Related information(clamp on meter|electromagnetic meter|venturi meterrotameter|orifice meter|ultrasonic flow meter|mass flow meter|coriolis mass flow meter|coriolis flow meter|magnetic flow meter|magmeter flow meter|magflow flow meter|mag meter flow meter|electromagnetic flow meter|vortex flow meter|turbine flow meter|thermal mass flow meter|thermal flow meter|rotameter flow meter)
Where can the DN250 vortex steam flowmeter be calibrated and what is the price? For the calibration of DN250 vortex steam flow meters, the local technical supervision bureau may not be able to handle such large flow meters. At present, the main institutions in China with corresponding verification capabilities and qualifications include Shanghai Testing Institute, Beijing China Testing Research Institute, and Kaifeng Flow Meter Factory. These institutions can provide professional verification services at a price of approximately 2000 yuan. However, it should be noted that there may be longer waiting times when submitting for inspection. When choosing a verification institution, it is recommended to understand the specific situation of each institution in advance, including the verification cycle, cost details, and whether on-site services are provided. In addition, you can also refer to the evaluations and feedback of other users to ensure satisfactory verification services. For enterprises, regular calibration of flow meters can not only ensure the accuracy and safety of the production process, but also effectively reduce cost losses caused by inaccurate measurements. Therefore, it is very important to arrange verification work in a timely manner. Considering the possible uncertainties in the verification process, such as long waiting times, it is recommended that companies reserve sufficient preparation time before verification to avoid affecting production plans due to verification delays. In short, choosing a suitable verification institution and arranging verification in a timely manner is crucial to ensuring the accuracy and safety of the production process. Hope the above information is helpful to you. 
>2. What flow meters are commonly used on steam pipelines?
>2. What flow meters are commonly used on steam pipelines? The commonly used flow meters on steam pipelines mainly include the following types, which need to be selected based on actual working conditions, measurement accuracy, range, pressure loss, and installation and maintenance costs.
1. Working principle of vortex flowmeter: Based on the Karman vortex street principle, the steam flow rate is calculated by measuring the alternating vortex frequency generated by the impact of steam fluid on the triangular cylinder vortex generator.
. The vortex frequency is directly proportional to the average flow velocity of the fluid, and the volumetric flow rate can be calculated by combining the cross-sectional area of the pipeline. Applicable conditions: Preferred for steam pipeline temperature ≤ 300 ℃, with low cost and wide applicability. Large measurement range, low pressure loss, high accuracy (usually ± 1%~± 2%), and high reliability. No movable mechanical parts, low maintenance, and long-term stable instrument parameters. Structural composition: sensors, converters, display instruments. Sensors (such as piezoelectric stress sensors) convert vortex mechanical effects into electrical signals and output flow values after processing. Signal output: Supports analog signals (4-20mA) or digital signals (pulse signals) for easy data transmission and reading. Image: The vortex flowmeter is disassembled to measure the vortex frequency and calculate the flow rate Working principle of differential pressure flowmeter: Based on Bernoulli equation and flow continuity equation, the flow rate is determined by measuring the differential pressure generated by throttling devices (such as orifice plate, nozzle, V-cone). Common